WHY use easyRadio?

• Because you need to get your wireless design up to prototype stage as fast as possible.
• Because you don’t have time or resources to write wireless software.
• Because you just want to put data in one end and get it back at the other.
• Because you want to spend time on YOUR application not the RF.
• Because you don’t need the hassle and expense of government approvals.

In WHICH applications can you use easy-Radio?

• You need a reliable range up to 1Km.
• You need a maximum data rate of 76.8 baud.
• You don’t need Bluetooth or Zigbee.
• You don’t have a network application.
• You need to market your products across Europe, North America and Asia.

WHAT does easyRadio cost?

• A typical simple system uses 2 transceivers so the wireless link will cost between £30 - £40. (33-48 Euros, $45 - $60).
• The evaluation kit contains everything you need to set up your application and costs less than £100 (112 euros, $150) including the modules.

HOW much will your wireless design cost using RFICs?

• Typical design time for a simple transceiver link is around 18 months.
• Approval costs, government test house etc will cost around £7,000.
• Typical capital equipment costs (spectrum and network analysers etc) up to £30.000.
• Total outlay for design could be around £100,000 plus.
• Amortised over 10,000 radios works out at £10 per unit PLUS cost of the radio to build.

easyRadio modules can cost less than a chip solution