eRIC Arduino Shields

eRIC Arduino Shields

eRIC Arduino Shield Kits


This ‘shield’ allows Arduino™ boards to communicate wirelessly using proprietary easyRadio technology.


Get Price

Key Features of the eRIC Arduino™ Shiled

  • The essence of these devices is ‘easy’. Host Arduino™ boards can send and receive (half duplex) up to 250 Bytes of data per packet that will be seamlessly delivered and presented to all other hosts within range. There is no need for any complicated ‘bit balancing’ or elaborate coding schemes. ‘Easy’: Data In and Data Out!
  • These devices provide considerably greater range (typically 200m) and less power consumption than similar Wi-Fi or Bluetooth dongles operating in the overcrowded 2.4GHz bands.
  • Frequency, bandwidth, power output and data rate can (optionally) be configured to allow multiple devices to communicate free from interference from each other and any other RF devices.
  • Addressing and implementation of networking (point to point, peer to peer, mesh) can handled by Arduino™ application software thus providing flexibility and simplicity.
  • An optional on-board 4 pin header allows connection of an external FT232 USB adapter device to configure the easyRadio module if need be.
  • Transmit, Receive, Busy and Power LEDs: Diagnostics.
  • Integral SMA Antenna connector: Allows use of extension cable for optimal antenna position.
  • Configurable RF parameters (optional): Fine tune for optimum performance.
  • Up to 180 Bytes per packet: Ideal for ‘Sense & Control’ applications.
  • Built-in Temperature Sensor: Usable by host program.
  • Addressing and implementation of networking (point to point, peer to peer, mesh) can handled by Arduino™ application software thus providing flexibility and simplicity.
  • An optional on-board 4 pin header allows connection of an external FT232 USB adapter device to configure the easyRadio module if need be.

 

 Part Number

 Frequency

Download

eRIC4-Duino

434 MHz

Data Sheet

eRIC9-Duino

868 / 915 MHz

Data Sheet

eRIC Arduino Shields are available for two regions: eRIC4 for European 433/4MHz licence exempt ISM band, eRIC9 dual band for European 868MHz and USA 902 - 928 MHz licence exempt ISM bands.

 

Relevant to eRIC Arduino Shields

eRA Arduino™ Shields

eRA Arduino™ Shields

eRA Arduino™ Shield Kits

The eRA Arduino Shield allows Arduino™ boards to communicate wirelessly using proprietary easyRadio technology.

More

eRIC Nitro Board

eRIC Nitro Board

eRIC Nitro Arduino Compatible Board

eRIC Nitro is a small Arduino compatible kit (it has a pre-assembled wireless Arduino board) with a low-power ISM-band radio module.

More

eRIC SMD Module Family

eRIC SMD Module Family

easyRadio SoC RF Modules - Transceivers

Lower-cost, intelligent, easy to program radio sub-system; a high performance System-on-Chip RF transceiver. Variants include Point-to-Point, Point-to-Multi Point and LPWAN Sigfox / LoRa.

More

Application Notes & Tutorials

Application Notes & Tutorials

A rich resource to explain some of the ways you can use our modules

Application Notes which you can use to get you started with your own project or application.

More

Tutorials

Tutorials

Get started quickly!

Take a look through some of our easy to follow tutorials for getting up and running with your easyRadio quickly. We have many useful examples of using some of the key parts of our products.

More

Code Examples

Code Examples

Some code examples to help get you started quickly.

Free to download and use, open source code examples for you to start testing and evaluating your radio project quickly and effectively.

More

Share your easyRadio projects

Tag your projects with #easyradio and share your pictures and experiences with us.
        

Low Power Radio Solutions
Station Lane
Witney
OX28 4BH
United Kingdom

T: +44 (0) 1993 709418      
F: +44 (0) 1993 708575
E:  sales@lprs.co.uk

    

Privacy & cookies